| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 10/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Production description:
Durable CWJ63 Side Feeder Machine With High Quality1. Parameters of CWJ63 side feeder |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Type | CWJ63 | |
| Barrel diameter (mm) | Φ63.5 | |
| Screw diameter (mm) | Φ62.8 | |
| Groove depth (mm) | 16.9 | |
| Legth of screw (mm) | 504 | |
| L/D | 8:1 | |
| Motor power | 5.5KW | |
| Reducer ratio | 10:1 | |
| Screw speed (rpm) | 307 | |
| Center distance (mm) | 48 | |
Flange connerctor size (mm)
|
125 | |
| 106 | ||
| 98 | ||
| 13.5 (M12) |
||
| φ10H7 | ||
| Feeding barrel hole size (mm) | 80×140 | |
| Feeding capacity (kg/h) |
short glass fiber(3-6mm) | ~350 |
| 1250 talcum powder grain dia. 5~30 micometer,bulk density 0.4~0.45kg/L | ~360 | |
| 3000 talcum powder, grain dia. 1~20 micometer,bulk density 0.3~0.35kg/L | ~200 | |
| Suit for extruder | 70/75 | |
| Mark | Part Name | Qty (Pcs) | Function |
| 1 | SEW Motor | 1 | Driving System |
| 2 | Gearbox Section | 1 | Transmission System |
| 3 | Hopper | 1 | Feeding |
| 4 | Screw Section | 2 | Mixing and conveying the filler |
| 5 | Barrel Section | 2 | Carry the screw shaft and melt the material |
| 6 | Bracket | 2 | Supporting the Side Feeder |
3. Advantages of Joiner Extrusion Side Feeder
1). Independently develop and produce gearboxes.
a. All gearboxes are machined by gear grinding, the accuracy is up to six grades, and carburizing and hardening the tooth surface, thus ensuring that the noise of gearboxes is very low.
b. Gear casting is made of resin sand and machining center to ensure high precision.
c. The gearbox's bearing is imported from Germany.
d. The gearbox has unique design, long life and low noise.
e. The gearbox and screw element are connected by spline sleeve, which is very convenient to disassemble
2). Barrel is made of wear resistant alloy steel and cooled by water channel.
3). Screw adopts modular screw, and the screw assembly can be adjusted according to different feeding materials to meet different feeding requirements.
4. Side feeders are used for the following reasons:
--reduction of wear costs in the melting section of the main screw and barrels
--More gentle processing of fillers
--Increase in throughput
--Increase in quality through the enough fixing
--Lower the cost
5. All models we produce
6. Raw material guarantee
The company has been cooperating with domestic and foreign first-line brand material suppliers for a long time, and strictly inspects the factory (elemental analysis, metallographic analysis, ultrasonic flaw detection, etc.) to ensure 100% qualified.
7. Professional monitoring equipment guarantee
We have three coordinate detector, two dimensional image measuring instrument, metallographic analyzer, ultrasonic flaw detector, element analyzer and other more than 10 kinds of advanced detection equipment, which is the strong guarantee of quality stability!8. Why choose us?
(1) Total solution of highly wear-resistance and corrosion-resistance problems;
(2) Expert of engineering design and consulting,
(3) Advanced manufacturing capabilities and technology,
(4) Lean production management
(5) Top quality products with high cost performance
9.Production Equipment
We also have advantages in production equipment and inspection equipment.
Joiner has over130 advanced equipment such as CNC thread grinder, CNC thread milling, CNC kneading block grinder, CNC forming milling, 4-axis machining center, automatic deep hole grinder, CNC lathe, CNC surface grinder, CNC external grinding, CNC band saw, laser marking machine, vacuum quenching furnace and vacuum tempering furnace. After the raw materials enter the market, all the processing procedures are in-house.
10. Quality
The quality of JOINER products is subject to internal quality control standards as well as to the quality management system ISO 9001:2000. By controls of the staff, all manufacturing steps are continuously checked. Before products leave the plant, they are subject to final quality control procedures. This is how we can guarantee quality at the highest level.
11 . FRQ
The Side Feeder is mainly including the Screw,Gearbox,Spline Housing,Stuffing Box,Hopper and Bracket.
|
Mark |
Part Name |
Qty (Pcs) |
Function |
| 1 |
SEW Motor |
1 |
Driving System |
| 2 |
Gearbox Section |
1 |
Transmission System |
| 3 |
Hopper |
1 |
Feeding |
| 4 |
Screw Section |
2 |
Mixing and conveying the filler |
| 5 |
Barrel Section |
2 |
Carry the screw shaft and melt the material |
| 6 |
Bracket |
2 |
Supporting the Side Feeder |
JOINER employs segmented screws with a selfwiping profile to provide optimum feeding properties for a wide range of raw materials such as fillers,fiberglass, talcum powder,calcium carbonate and most inorganic materials.
Side feeders are used for the following reasons:
Reduction of wear costs in the melting section of the main screw and barrels
More gentle processing of fillers
Increase in throughput
Increase in quality through the enough fixing
Lower the cost
Our side feeders features :
Very durable thanks to its durable integral liner inside barrels
The tightly intermeshing co-rotating segments with various pitch have an improved conveying behaviour and ensure the precision (long GF±5%,short GF±2%) and output (caco3 550Kg/h,GF 500Kg/h)
More human centered design,ease of operation.for example the glass window,on the splined sleeve, flat screw head ,the adjustable support and the drawer for clean up the leak .Can designed based on user requests.
Why choose us?
The application of our side feeder
Our side feeders are available, both matched to almost every type of twin screw extruder.Now it has gradually replaced all the Nanjing Side feeders used for foreign customer. And there are nearly 50 sets used by Shanghai and Guangzhou Kingfa. It works successfully, and our clients are satisfied.
Through our continuous improvement, we have produced three generations of side feeder .
Joiner Machinery Co.,Ltd has several years experience in the manufacture and supply of new and refurbished wear parts for all major makes of twin-screw extruders and the Industries involved in plastics industry, chemical industry, powder coating, food food industry, wood plastic etc..
Through close working relationships with our customers we have been able to fulfill their requirements. Flexibility enables us to design and manufacture standard and bespoke components for unique applications.
Through our highly trained and experienced staff we are able to offer technical support and advice.
Our strengths are based on many years experience supplying the following:
* Competitive costs per unit of production
* Fast turn round for collection and delivery on refurbished parts
* Parts available from stock for a wide range of extruder makes
* Comprehensive inspection procedure on all parts prior to dispatch
* A time proven quality service
* Latest manufacturing techniques and metallurgy, ensuring consistent and reliable performance of parts
* Customized solutions to meet specific needs.
Packaging Delivery
Packaging Details: Wooden case, Sea-worthy or export standard.
Port: SHENZHEN
Lead time: 40-50 days after order confirmation.
FRQ
1. Q: Are you a factory or trading company?
----A: A factory
2. Q: Where is your factory located? How can I visit there?
-----A: Our factory is located in Chengdu, Sichuan Province, China,
1) You can fly to Chengdu Airport directly. We will pick you up when you arrive in the airport;
All our clients, from domestic or abroad, are warmly welcome to visit us!
3.Q: What makes you different with others?
----A: 1) Our Excellent Service
For a quick, no hassle quote just send email to us
We promise to reply with a price within 24 hours - sometimes even within the hour.
2) Our quick manufacturing time
For Normal orders, we will promise to produce within 30 working days.
As a manufacturer, we can ensure the delivery time according to the formal contract.
4.Q: How about the delivery time?
----A: This depends on the product. Typically standard products are delivered within 30 days.
5.Q: May I know the status of my order?
----A: Yes .We will send you information and photos at different production stage of your order. You will get the latest information in time.
){kind=link}